New flooring for 500 sq ft typically costs $2,100 – $4,800 installed for mid-range luxury vinyl plank, about $4 – $9.50 per sq ft. Laminate and carpet cost a little less; hardwood, tile and stone cost more, up to $20 or more per sq ft for natural stone. Price your rooms with the flooring cost calculator.
Flooring costs at a glance
| Project | Typical cost (national) | What drives the price | Calculator |
|---|---|---|---|
| New flooring (500 sq ft) | $2,100 – $4,800 for LVP; $4,200 – $8,500 for solid hardwood | Material, grade, removal, subfloor prep | Flooring calculator |
| Hardwood floor refinishing | $1.50 – $5 per sq ft to sand and refinish; $1 – $2.50 to screen and recoat | Floor condition, stain color, number of coats | Coming soon |
| Carpet and tile cleaning | $40 – $90 per room | Rooms, stains, grout sealing | Coming soon |
| Floor repair | $200 – $1,200 for minor repairs; $500 – $6,000+ for sagging or water damage | Material, damage type, subfloor | Coming soon |
Installed cost by flooring type
| Flooring | Budget | Mid-range | Premium |
|---|---|---|---|
| Solid hardwood | $7.50 – $14.50 | $8.50 – $17 | $10.50 – $22 |
| Engineered hardwood | $5.50 – $11 | $6.50 – $12.50 | $8 – $16.50 |
| Laminate | $3 – $7.50 | $3.50 – $8.50 | $4.50 – $10.50 |
| Luxury vinyl plank (LVP) | $3.50 – $8 | $4 – $9.50 | $5.50 – $12 |
| Carpet (with pad) | $2.50 – $6 | $3 – $7.50 | $4.50 – $10 |
| Ceramic or porcelain tile | $6.50 – $16 | $7 – $17.50 | $8.50 – $21.50 |
| Natural stone tile | $12 – $24.50 | $13.50 – $28.50 | $17 – $37 |
Choosing a floor for each room
| Room | Good choices | Avoid |
|---|---|---|
| Kitchen | LVP, tile, engineered hardwood | Carpet; solid hardwood if spills are frequent |
| Bathroom and laundry | Tile, LVP, sheet vinyl | Hardwood, laminate, carpet |
| Living and bedrooms | Hardwood, engineered, laminate, carpet, LVP | Nothing in particular |
| Basement | LVP, tile, engineered hardwood | Solid hardwood, most laminate |
| Homes with pets | LVP, tile, laminate with a high wear rating | Soft hardwoods, light carpet |
Buying the flooring yourself
Many installers will fit flooring you buy yourself and quote labor only, which typically runs $1 to $12 per sq ft depending on the material (carpet and floating floors at the low end, tile and stone at the high end). You keep control of the material and can catch sales, but you are responsible for ordering enough, and some installers will not warranty materials they did not supply.
Removal and subfloor prep
Tearing out carpet or sheet vinyl usually adds $0.50 to $1.50 per sq ft; tile, glued-down floors and hardwood $1.50 to $3.50. Floors also need a flat, sound subfloor: leveling or patching adds $1 to $3 per sq ft and replacing damaged plywood $3 to $7.
Refinish or replace hardwood?
Solid hardwood can usually be sanded and refinished several times, for about $1.50 to $5 per sq ft, a fraction of the cost of new floors. Replace instead if boards are cupped from water damage, the wear layer of engineered flooring is too thin to sand, or you want a different material.
How much extra flooring to order
Order 5% to 15% more than the measured area to cover cuts, mistakes and future repairs: about 10% for straight-laid planks and tile, 15% for diagonal or herringbone patterns. Our calculator adds 10% to material costs.
Common flooring mistakes
- Forgetting the waste allowance. Running short mid-job can mean a different dye lot.
- Laying LVP over an uneven subfloor. Dips and humps cause gaps, clicking and broken locking joints.
- Skipping acclimation. Wood and some laminates need to sit in the room for a few days before installation.
- Not budgeting for trim and transitions, which can add a few hundred dollars per room.
Hiring a flooring installer
Ask for a written quote that lists the material, square footage with waste, removal and disposal, subfloor prep, underlayment or moisture barrier, trim and transitions, furniture moving and the labor warranty. Check that the installer is licensed where your state requires it and carries liability insurance.
Safety: vinyl tiles, sheet flooring and black adhesive installed before about 1980 can contain asbestos. Have old floors tested before sanding or tearing them out.
Related costs: Remodeling, Painting and Walls & Ceilings.
Get local flooring quotes
Price your rooms first, then compare quotes. Use the flooring cost calculator to get an estimate and request up to three free quotes, with no obligation.
Flooring FAQs
Budget carpet, sheet vinyl and laminate are usually the cheapest, often $3 to $6 per sq ft installed.
About $4,200 – $9,500 for mid-range LVP and $8,400 – $16,900 for solid hardwood, before removal and subfloor work.
Yes. Mid-range LVP costs about $4 – $9.50 per sq ft installed against $8.50 – $17 for solid hardwood.
A few rooms of carpet, laminate or LVP usually take one to two days. Tile and hardwood can take several days including curing and finishing.
Refinish if the boards are sound; it costs $1.50 to $5 per sq ft. Replace if they are water-damaged or worn too thin.
How we estimate these costs
Our new-flooring ranges come straight from the ImprovementCalc calculator, which prices materials and labor separately for each flooring type and is checked against national cost guides updated in 2026. Refinishing, cleaning and repair ranges are national figures from published cost guides.
Sources:
- Angi: Flooring Installation Cost (2026)
- This Old House: Flooring Installation Cost by Type
- This Old House: Vinyl Plank Flooring Installation Cost (2026)
- This Old House: Tile Floor Cost (2026)
- HomeGuide: Cost to Refinish Hardwood Floors (2026)
- HomeGuide: Floor Repair Cost (2026)
- US EPA: Asbestos in your home
Prices last checked November 2026.
Our full method: How ImprovementCalc estimates costs Where our prices come from How we test every calculator