Skip to content
ImprovementCalcIndependent cost estimates for US homeowners

Fence Cost Calculator

A 150 ft wood privacy fence typically costs $4,000 – $9,800 with one walk gate, about $25 to $60 per linear foot. Chain link runs about $1,600 – $5,300 for the same length.

Use the fence cost calculator below to price your fence by length, material, height and gates. The tables and examples on this page use the same formula.

Fence Cost Calculator

ft

A typical backyard needs 150 to 200 ft.

gates
gates

Sets local labor rates.

Estimated fence cost

$4,000 – $9,800

Typical: $6,900

Using national average prices. Add your zip code for local prices.

  • Fence$3,800 – $9,000
  • Gates$200 – $800
  • Confirm your property line before building. A survey costs far less than moving a fence.
  • Call 811 a few days before digging post holes so buried utility lines can be marked.

How is this calculated?

Got two or three quotes? Compare them side by side

What drives the cost of a fence

Fence installers price by the linear foot. The rate covers posts set in concrete, rails, panels or fabric, and labor. Material sets the rate, taller fences use more material, and gates and removing an old fence are separate charges. Very short runs carry a minimum.

Material and length

MaterialPer linear ft100 ft150 ft200 ft
Wood$25 – $60$2,500 – $6,000$3,800 – $9,000$5,000 – $12,000
Vinyl$30 – $60$3,000 – $6,000$4,500 – $9,000$6,000 – $12,000
Chain link$9 – $30$1,000 – $3,000$1,400 – $4,500$1,800 – $6,000
Aluminum or steel$25 – $75$2,500 – $7,500$3,800 – $11,300$5,000 – $15,000
Wrought iron$50 – $85$5,000 – $8,500$7,500 – $12,800$10,000 – $17,000
Barbed wire$3 – $6$1,000 – $1,800$1,000 – $1,800$1,000 – $1,800
6 ft tall (barbed wire any height), no gates or removal, national average.

Height, gates and removal

ItemCost
4 ft tall20% less than 6 ft
8 ft tall35% more than 6 ft
Walk gate$200 – $800 each
Driveway gate$600 – $2,000 each
Old fence removal$10 – $20 per linear ft
Fence repair$250 – $750

Fence cost by region

RegionPrice factor150 ft wood, 6 ft, one gateTypical
Southeast (GA, SC, NC, AL, MS, TN, KY, VA, WV)0.88$3,500 – $8,600$6,100
South Central (TX, OK, LA, AR)0.90$3,600 – $8,800$6,200
Midwest and Mountain West1.00$4,000 – $9,800$6,900
Mid-Atlantic (NY, NJ, PA, MD, DE, DC)1.15$4,500 – $11,300$7,900
New England1.20$4,700 – $11,800$8,300
Florida1.20$4,700 – $11,800$8,300
Pacific (CA, WA, OR, AK, HI)1.25$4,900 – $12,300$8,600
The price factor applies to labor and materials.

Worked examples: three real-world fences

These are example homes, not real customers. Each uses national average prices (price factor 1.0).

Example 1: wood privacy fence

150 ft of 6 ft wood privacy fence around a backyard with one walk gate.

  1. Fence: 150 × $25 = $3,750 low; 150 × $60 = $9,000 high
  2. Walk gate: $200 low; $800 high
  3. Total: $3,950 low; $9,800 high, rounded

Estimated cost: $4,000 – $9,800 (typical $6,900)

Example 2: vinyl fence with a driveway gate

200 ft of 6 ft vinyl privacy fence, one walk gate and one driveway gate, old wood fence torn out.

  1. Fence: 200 × $30 = $6,000 low; 200 × $60 = $12,000 high
  2. Gates: $200 + $600 = $800 low; $800 + $2,000 = $2,800 high
  3. Removal: 200 × $10 = $2,000 low; 200 × $20 = $4,000 high
  4. Total: $8,800 low; $18,800 high

Estimated cost: $8,800 – $18,800 (typical $13,800)

Example 3: chain link for a dog run

250 ft of 4 ft chain link with two walk gates.

  1. Fence: 250 × $9 × 0.8 = $1,800 low; 250 × $30 × 0.8 = $6,000 high
  2. Gates: 2 × $200 = $400 low; 2 × $800 = $1,600 high
  3. Total: $2,200 low; $7,600 high

Estimated cost: $2,200 – $7,600 (typical $4,900)

Hidden costs to budget for

  • A property survey if the line is unclear.
  • Permits in many towns.
  • Rocky soil or roots that slow post digging.
  • Slopes that need stepped or racked panels.
  • Staining a wood fence once it dries out.
  • Clearing brush along the fence line.

DIY vs hiring a pro

Many homeowners build their own wood or chain-link fence and save half the cost or more. The hard part is setting posts straight, plumb and deep enough below the frost line. Long runs, slopes, vinyl and metal fences and anything on a disputed line are usually worth hiring out.

Safety: call 811 before digging post holes so buried utility lines can be marked.

How to read a fence quote

  • Length, height and material grade
  • Post spacing, depth and concrete
  • Gates: size, hardware and latches
  • Removal and haul-away of the old fence
  • Permits, survey and who confirms the line
  • Warranty on labor and materials

Red flags:

  • No post depth listed
  • No mention of who calls 811
  • Fence placed without confirming the property line
  • Large cash deposits
  • No license or insurance

Ways to save on a fence

  • Split the cost of a shared fence with a neighbor.
  • Use 4 ft fencing where privacy is not needed.
  • Choose fewer gates.
  • Remove the old fence yourself.
  • Book in late fall or winter, when demand is lower.

Tip: face the finished side of the fence toward your neighbor. Many towns require it, and it keeps the peace.

Get local quotes to confirm your estimate

An installer will walk the line and check the ground before giving a firm price. Use the calculator above to request up to three free quotes, with no obligation. More fencing prices: Fencing.

Fence FAQs

How much does a fence cost per foot?

About $25 to $60 for wood, $30 to $60 for vinyl, $9 to $30 for chain link and $50 to $85 for wrought iron.

How much does a 150 ft fence cost?

About $4,000 – $9,800 for 6 ft wood privacy fencing with one gate.

How much does a fence gate cost?

About $200 to $800 for a walk gate and $600 to $2,000 for a driveway gate.

How much does it cost to take out an old fence?

About $10 to $20 per linear foot, including haul-away.

How long does a fence installation take?

Usually 1 to 3 days for a typical backyard once materials arrive.

How we estimate these costs

ImprovementCalc multiplies the fence length by a price per linear foot at 6 ft: wood $25 to $60, vinyl $30 to $60, chain link $9 to $30, aluminum $25 to $75, wrought iron $50 to $85 and barbed wire $3 to $6. Four-foot fences price at 0.8 and eight-foot at 1.35. Walk gates add $200 to $800, driveway gates $600 to $2,000 and removal $10 to $20 per foot. New fences carry a $1,000 to $1,800 minimum; repairs are $250 to $750. Totals are rounded to the nearest $100.

Sources:

Prices last checked November 2026.