Skip to content
ImprovementCalcIndependent cost estimates for US homeowners

Flooring

Flooring cost calculators

  • Flooring Cost Calculator

    Price new floors by room size, material, grade and prep work.

    Typical cost: $2,100 – $4,800 · 500 sq ft LVP, installed

New flooring for 500 sq ft typically costs $2,100 – $4,800 installed for mid-range luxury vinyl plank, about $4 – $9.50 per sq ft. Laminate and carpet cost a little less; hardwood, tile and stone cost more, up to $20 or more per sq ft for natural stone. Price your rooms with the flooring cost calculator.

Flooring costs at a glance

ProjectTypical cost (national)What drives the priceCalculator
New flooring (500 sq ft)$2,100 – $4,800 for LVP; $4,200 – $8,500 for solid hardwoodMaterial, grade, removal, subfloor prepFlooring calculator
Hardwood floor refinishing$1.50 – $5 per sq ft to sand and refinish; $1 – $2.50 to screen and recoatFloor condition, stain color, number of coatsComing soon
Carpet and tile cleaning$40 – $90 per roomRooms, stains, grout sealingComing soon
Floor repair$200 – $1,200 for minor repairs; $500 – $6,000+ for sagging or water damageMaterial, damage type, subfloorComing soon
Installed prices, national averages. New-flooring ranges come from our calculator.

Installed cost by flooring type

FlooringBudgetMid-rangePremium
Solid hardwood$7.50 – $14.50$8.50 – $17$10.50 – $22
Engineered hardwood$5.50 – $11$6.50 – $12.50$8 – $16.50
Laminate$3 – $7.50$3.50 – $8.50$4.50 – $10.50
Luxury vinyl plank (LVP)$3.50 – $8$4 – $9.50$5.50 – $12
Carpet (with pad)$2.50 – $6$3 – $7.50$4.50 – $10
Ceramic or porcelain tile$6.50 – $16$7 – $17.50$8.50 – $21.50
Natural stone tile$12 – $24.50$13.50 – $28.50$17 – $37
Per sq ft, materials (with 10% waste) plus installation, before removal and subfloor work.

Choosing a floor for each room

RoomGood choicesAvoid
KitchenLVP, tile, engineered hardwoodCarpet; solid hardwood if spills are frequent
Bathroom and laundryTile, LVP, sheet vinylHardwood, laminate, carpet
Living and bedroomsHardwood, engineered, laminate, carpet, LVPNothing in particular
BasementLVP, tile, engineered hardwoodSolid hardwood, most laminate
Homes with petsLVP, tile, laminate with a high wear ratingSoft hardwoods, light carpet

Buying the flooring yourself

Many installers will fit flooring you buy yourself and quote labor only, which typically runs $1 to $12 per sq ft depending on the material (carpet and floating floors at the low end, tile and stone at the high end). You keep control of the material and can catch sales, but you are responsible for ordering enough, and some installers will not warranty materials they did not supply.

Removal and subfloor prep

Tearing out carpet or sheet vinyl usually adds $0.50 to $1.50 per sq ft; tile, glued-down floors and hardwood $1.50 to $3.50. Floors also need a flat, sound subfloor: leveling or patching adds $1 to $3 per sq ft and replacing damaged plywood $3 to $7.

Refinish or replace hardwood?

Solid hardwood can usually be sanded and refinished several times, for about $1.50 to $5 per sq ft, a fraction of the cost of new floors. Replace instead if boards are cupped from water damage, the wear layer of engineered flooring is too thin to sand, or you want a different material.

How much extra flooring to order

Order 5% to 15% more than the measured area to cover cuts, mistakes and future repairs: about 10% for straight-laid planks and tile, 15% for diagonal or herringbone patterns. Our calculator adds 10% to material costs.

Common flooring mistakes

  • Forgetting the waste allowance. Running short mid-job can mean a different dye lot.
  • Laying LVP over an uneven subfloor. Dips and humps cause gaps, clicking and broken locking joints.
  • Skipping acclimation. Wood and some laminates need to sit in the room for a few days before installation.
  • Not budgeting for trim and transitions, which can add a few hundred dollars per room.

Hiring a flooring installer

Ask for a written quote that lists the material, square footage with waste, removal and disposal, subfloor prep, underlayment or moisture barrier, trim and transitions, furniture moving and the labor warranty. Check that the installer is licensed where your state requires it and carries liability insurance.

Safety: vinyl tiles, sheet flooring and black adhesive installed before about 1980 can contain asbestos. Have old floors tested before sanding or tearing them out.

Related costs: Remodeling, Painting and Walls & Ceilings.

Get local flooring quotes

Price your rooms first, then compare quotes. Use the flooring cost calculator to get an estimate and request up to three free quotes, with no obligation.

Flooring FAQs

What is the cheapest flooring to install?

Budget carpet, sheet vinyl and laminate are usually the cheapest, often $3 to $6 per sq ft installed.

How much does it cost to floor a 1,000 sq ft house?

About $4,200 – $9,500 for mid-range LVP and $8,400 – $16,900 for solid hardwood, before removal and subfloor work.

Is LVP cheaper than hardwood?

Yes. Mid-range LVP costs about $4 – $9.50 per sq ft installed against $8.50 – $17 for solid hardwood.

How long does flooring installation take?

A few rooms of carpet, laminate or LVP usually take one to two days. Tile and hardwood can take several days including curing and finishing.

Should I refinish or replace my hardwood floors?

Refinish if the boards are sound; it costs $1.50 to $5 per sq ft. Replace if they are water-damaged or worn too thin.

How we estimate these costs

Our new-flooring ranges come straight from the ImprovementCalc calculator, which prices materials and labor separately for each flooring type and is checked against national cost guides updated in 2026. Refinishing, cleaning and repair ranges are national figures from published cost guides.

Sources:

Prices last checked November 2026.