Skip to content
ImprovementCalcIndependent cost estimates for US homeowners

Plumbing & Water Heaters

Plumbing & Water Heaters cost calculators

Replacing a 50-gallon gas water heater typically costs $1,400 – $2,900 installed, and a gas tankless unit $2,800 – $5,300. Bigger plumbing jobs cost much more: a new sewer line usually runs $2,000 to $10,000 and a conventional septic system $3,000 to $8,000. Everyday repairs are a few hundred dollars. Start with the water heater replacement cost calculator.

Plumbing costs at a glance

ProjectTypical cost (national)What drives the priceCalculator
Water heater replacement$1,400 – $2,900 (50-gallon gas tank); tankless $2,800 – $5,300Tank vs tankless, fuel, size, venting and gas lineWater heater calculator
Septic system$3,000 – $8,000 conventional; $10,000 – $20,000 mound or aerobicSystem type, soil test results, tank size, permitsComing soon
Sewer line replacement$2,000 – $10,000 (about 40 ft); $50 – $250 per ftLength, depth, trenchless vs digging, what sits on topComing soon
Water main replacement$50 – $150 per linear ftLength, pipe material, digging vs boringComing soon
Whole-house repipe$3,900 – $7,500 typical; more for copper and large homesPipe material, bathrooms, stories, wall accessComing soon
Gas line installation$15 – $50+ per linear ftLength, pipe type, new appliances, permitComing soon
Home fire sprinklers$1.50 – $3 per sq ft new build; $2 – $7 retrofitNew construction vs retrofit, home size, water supplyComing soon
Sump pump$800 – $3,000 (about $1,100 average)Pedestal vs submersible, new pit, battery backupComing soon
Water softener or filtration$500 – $6,000Softener vs whole-house filter vs reverse osmosis, plumbing changesComing soon
Common plumbing repairs$100 – $850 for most jobs; plumbers charge $45 – $150 per hourProblem, access, emergency call-outComing soon
Installed prices, national averages. The water heater ranges come from our calculator and include removal of the old unit and a $50 to $300 permit.

Which plumbing project do you need?

Tank or tankless water heater?

A standard tank heater is the cheapest to install: about $1,400 – $2,900 for a 50-gallon gas model and $1,100 – $2,500 for electric. A tankless heater heats water on demand, so it never runs out and lasts 15 to 20 years instead of 8 to 12, but a gas unit costs $2,800 – $5,300 and switching from a tank usually means a larger gas line and new venting on top of that.

Type3-4 person home, installedLifespanBest for
Gas tank (50 gallon)$1,400 – $2,9008 – 12 yearsLowest upfront cost where gas is available
Electric tank (50 gallon)$1,100 – $2,5008 – 12 yearsHomes without gas; simple swaps
Gas tankless$2,800 – $5,30015 – 20 yearsLarge households, long showers, limited space
Electric tankless$1,900 – $3,90015 – 20 yearsSmall homes or single points of use; check panel capacity
Heat pump (hybrid electric)$2,600 – $4,90010 – 15 yearsReplacing an electric tank; lowest running cost of electric options
Like-for-like replacements. Switching type or fuel adds gas line, venting or electrical work.

Heat pump water heaters pull heat from the surrounding air. The US Department of Energy says they can be two to three times more energy efficient than standard electric water heaters, but they need a garage, basement or other large space and a 240-volt circuit.

Repair or replace?

Most water heater repairs, like a heating element, thermostat or thermocouple, cost $150 to $700. Replace instead if the tank itself leaks, the heater is more than about 10 years old, or the water is rusty. For pipes, galvanized steel and polybutylene are the usual reasons for a whole-house repipe; scattered leaks in copper can often be repaired.

Trenchless or traditional sewer line replacement?

Traditional replacement digs a trench along the whole line. Trenchless methods (pipe bursting or lining) need only one or two small pits, so they spare driveways, trees and landscaping. Per foot the work often costs about the same or more, but you avoid most of the restoration bill. Trenchless won’t work on every line, for example one that has collapsed or sags badly. A camera inspection ($125 to $500) shows which method fits.

Septic systems

A conventional system (tank plus a gravity drain field) is the cheapest, about $3,000 to $8,000. Poor soil, a high water table or a small lot can require a mound or aerobic treatment system, which typically costs $10,000 to $20,000. Signs a system is failing include slow drains, sewage odors, soggy ground or bright green grass over the drain field. Pumping every 3 to 5 years ($300 to $700) is the best way to make a system last.

Common plumbing mistakes

  • Ignoring the anode rod and expansion tank. Checking the anode rod every few years can add years to a tank, and many areas now require a thermal expansion tank when a water heater is replaced.
  • Not checking who owns the sewer lateral. In many towns the homeowner owns the line all the way to the street main. Ask the city before you hire anyone.
  • Getting a sewer quote without a camera inspection. Without a video of the line, a contractor is guessing at the problem and the method.
  • Sizing a tankless heater by guesswork. Tankless units are sized by flow rate and temperature rise, and a gas unit may need a bigger gas line than you have.

Hiring a plumber

Most states license plumbers, and many cities require a permit for water heaters, repiping, sewer and water line work. Gas piping and home fire sprinkler systems are licensed-only work everywhere: don’t hire an unlicensed handyman for them. Ask for the license number, proof of insurance, and a written quote that lists the equipment model, the permit, haul-away of old equipment and any code upgrades such as an expansion tank or seismic straps.

Safety: a gas water heater that is vented wrongly can leak carbon monoxide. If you smell gas, leave the house and call your gas utility from outside. Keep carbon monoxide alarms on every floor.

Plumbing prices vary by region with labor rates and local codes. Pacific and New England states often pay 20% to 25% above the national average. The ImprovementCalc calculators adjust each estimate for your zip code.

Related costs: Heating & Cooling, Remodeling, Foundation & Waterproofing and Landscaping & Trees.

Get local plumbing quotes

Price your water heater first, then compare quotes. Use the water heater cost calculator to get an estimate and request up to three free quotes, with no obligation.

Plumbing FAQs

How much does a plumber charge per hour?

Usually $45 to $150 an hour, plus a service call fee. Many plumbers quote common jobs at a flat price instead.

How long does a water heater last?

Tank water heaters typically last 8 to 12 years and tankless units 15 to 20 years. Hard water and skipped maintenance shorten both.

Is a tankless water heater worth it?

It costs more up front ($2,800 – $5,300 for gas, before any gas line or venting upgrades) but lasts longer and never runs out of hot water. It pays off best in larger households that use a lot of hot water.

Who pays to fix the sewer line to the street?

In many towns the homeowner owns the sewer lateral from the house to the main, sometimes including the part under the street. Check with your city or sewer district.

How often should a septic tank be pumped?

Every 3 to 5 years for most households. Pumping costs about $300 to $700.

How we estimate these costs

Our water heater ranges come straight from the ImprovementCalc calculator, which prices each heater type by household size and is checked against national cost guides updated in 2026. Ranges for other plumbing projects are national figures from published cost guides. Your local price depends on labor rates, permits, access and the condition of your existing plumbing.

Sources:

Prices last checked November 2026.