Skip to content
ImprovementCalcIndependent cost estimates for US homeowners

Heat Pump Cost Calculator

A ducted air-source heat pump usually costs $7,100 – $12,300 installed for a standard 3-ton system. Premium cold-climate models and larger homes run $15,000 to $30,000, and geothermal systems cost $15,000 to $35,000 or more.

Use the heat pump cost calculator below to price your system by home size, climate, type, efficiency and ductwork. The tables and examples on this page use the same formula.

Heat Pump Cost Calculator

sq ft

Sets local labor rates.

Estimated heat pump cost

$8,600 – $14,800

Typical: $11,700

Using national average prices. Add your zip code for local prices.

  • System size4.0 tons
  • Heat pump system, installed$8,500 – $14,500
  • Permit$100 – $300
  • Size is a rule-of-thumb estimate. Ask for a Manual J load calculation; cold-climate homes may need a larger unit or backup heat.
  • Older homes may need an electrical panel upgrade for a heat pump. Ask the installer to check before you sign.
  • No ducts at all? A ductless mini-split is usually cheaper than adding ductwork.

How is this calculated?

Got two or three quotes? Compare them side by side

What drives the cost of a heat pump

A heat pump moves heat instead of burning fuel: outdoors in summer and indoors in winter. A ducted system has an outdoor unit and an indoor air handler, so one installation replaces both your AC and your furnace. The calculator prices air-source systems as a fixed amount plus an amount per ton, times an efficiency factor. Geothermal systems have their own rates, which include drilling or digging the ground loop.

Home size and climate

Heat pumps are sized in tons like air conditioners. In cold climates they are sized for heating, so the calculator allows fewer square feet per ton there (450) than in mixed climates (550). It rounds up to the next half ton, from 1.5 to 5 tons.

HomeSizeStandard air-source, installedTypical
1,000 sq ft, mixed2 tons$5,600 – $9,800$7,700
1,500 sq ft, mixed3 tons$7,100 – $12,300$9,700
2,000 sq ft, mixed4 tons$8,600 – $14,800$11,700
2,000 sq ft, cold4.5 tons$9,300 – $16,100$12,700
2,500 sq ft, mixed5 tons$10,100 – $17,300$13,700
3,000 sq ft, mixed5 tons$10,100 – $17,300$13,700
Ducts in good shape, $50 to $300 permit included, national average.

Type of heat pump

TypeHow it works3.5-ton system, installedBest for
Air-sourcePulls heat from outdoor air$7,800 – $13,600Most homes with ducts
Geothermal (ground-source)Pulls heat from the ground through buried pipe loops$16,800 – $28,100Long-term owners with yard space; lowest running costs

Ductless mini-splits are another kind of heat pump, for homes without ducts; they are priced separately (about $3,000 to $4,900 for one zone).

Efficiency

EfficiencyPrice factor3-ton air-source, installed
Standard (14.3 to 15 SEER2)× 1.0$7,100 – $12,300
High (16 to 18 SEER2, two-stage)× 1.35$9,500 – $16,500
Premium (19+ SEER2, variable-speed or cold-climate)× 1.7$12,000 – $20,700

Every new split heat pump must reach at least 14.3 SEER2 and 7.5 HSPF2 (the heating rating). Variable-speed and cold-climate models keep heating efficiently in freezing weather; the US Department of Energy reports cold-climate heat pumps can cut household energy use by up to 40%.

Existing ductwork

Sound ducts can be reused. Sealing and repairs add $500 to $2,000; full replacement adds $1,400 to $6,000. If you have no ducts at all, mini-splits are usually cheaper than adding ductwork.

What heats your home now

This doesn’t change the price, but it changes the payoff. Homes that heat with oil, propane or electric baseboard usually see the biggest savings when they switch. If you have a newer gas furnace, you can keep it as backup heat for the coldest days (a “dual fuel” system).

Heat pump cost by region

RegionPrice factor2,000 sq ft home, 4-ton standard air-sourceTypical
Southeast (GA, SC, NC, AL, MS, TN, KY, VA, WV)0.88$7,500 – $13,100$10,300
South Central (TX, OK, LA, AR)0.90$7,700 – $13,400$10,500
Midwest and Mountain West1.00$8,600 – $14,800$11,700
Mid-Atlantic (NY, NJ, PA, MD, DE, DC)1.15$9,800 – $17,000$13,400
New England1.20$10,300 – $17,700$14,000
Florida1.20$10,300 – $17,700$14,000
Pacific (CA, WA, OR, AK, HI)1.25$10,700 – $18,400$14,600
The price factor applies to equipment and labor, not the permit.

Worked examples: three real-world homes

These are example homes, not real customers. Each uses national average prices (price factor 1.0).

Example 1: 1,500 sq ft home, standard air-source

Mixed climate, standard efficiency, ducts in good shape.

  1. Size: 1,500 ÷ 550 = 2.73 tons, rounded up to 3 tons
  2. System, low: $2,500 + $1,500 × 3 = $7,000; high: $4,500 + $2,500 × 3 = $12,000
  3. Add permit: $7,050 low; $12,300 high, rounded

Estimated cost: $7,100 – $12,300 (typical $9,700)

Example 2: 2,200 sq ft home in a cold climate, premium heat pump

Cold climate, premium variable-speed model, ducts need repairs; replacing an oil furnace.

  1. Size: 2,200 ÷ 450 = 4.89 tons, rounded up to 5 tons
  2. System, low: ($2,500 + $1,500 × 5) × 1.7 = $17,000; high: ($4,500 + $2,500 × 5) × 1.7 = $28,900
  3. Duct repairs: $500 low; $2,000 high
  4. Add permit: $17,550 low; $31,200 high, rounded

Estimated cost: $17,600 – $31,200 (typical $24,400)

Example 3: 2,500 sq ft home, geothermal

Mixed climate, geothermal ground-source system, ducts in good shape.

  1. Size: 2,500 ÷ 550 = 4.55 tons, rounded up to 5 tons
  2. System, low: $8,000 + $2,500 × 5 = $20,500; high: $12,000 + $4,500 × 5 = $34,500
  3. Add permit: $20,550 low; $34,800 high, rounded

Estimated cost: $20,600 – $34,800 (typical $27,700)

Hidden costs to budget for

  • Electrical upgrades. Older homes may need a bigger panel or new circuits for the outdoor unit and backup heat strips.
  • Backup heat. Cold-climate homes may need electric heat strips or a kept furnace for the coldest nights.
  • Ductwork, $500 to $6,000 depending on condition.
  • Thermostat. Variable-speed systems often need a matching thermostat.
  • Removing the old furnace or oil tank if you are switching fuels.
  • Permit, usually $50 to $300.
  • Ground loop surprises for geothermal, such as rock or a small lot that needs vertical drilling.

DIY vs hiring a pro

A ducted heat pump is a pro job. Refrigerant handling requires EPA Section 608 certification, the system must be charged and tested, and the high-voltage wiring and permit inspections need a licensed contractor. Geothermal loops need specialist drilling or excavation. Homeowners can keep the outdoor unit clear of snow and leaves and change filters regularly.

Safety: heat pumps run on 240-volt circuits. Don’t open the outdoor unit or electrical panel yourself.

How to read a heat pump quote

  • Brand and model numbers for the outdoor unit and air handler (matched)
  • Size in tons, SEER2 and HSPF2, and the heating output at low temperatures
  • Backup heat: heat strips, kept furnace or none
  • Duct inspection, sealing or replacement
  • Electrical work and whether a panel upgrade is needed
  • Thermostat, permit, removal of old equipment
  • For geothermal: loop type, depth or length, and who does the drilling
  • Parts and labor warranties

Red flags:

  • No mention of how the system will perform on your coldest days
  • Sizing without a load calculation
  • Promised savings with no explanation of your current fuel costs
  • Federal tax credit claims for a 2026 installation
  • No license, insurance or refrigerant certification

Repair or replace your heat pump?

Repair is usually enough if…Replace if…
The heat pump is under about 10 years oldIt is 12 to 15 years old or more
The fix is a capacitor, thermostat or drain ($75 to $400)The compressor ($800 to $2,500) has failed
It heats and cools well once fixedIt struggles in cold weather or needs frequent repairs
It uses a refrigerant that is still widely servicedRepair parts are hard to find

Most heat pump repairs cost $150 to $650, with an average of about $400.

Ways to save on a heat pump

  • Compare three or more quotes with matched model numbers.
  • Seal and insulate first. A tighter home can use a smaller, cheaper system.
  • Keep a newer gas furnace as backup instead of paying for heat strips you’ll rarely use.
  • Choose premium models only where you need them. Mild climates rarely need cold-climate equipment.
  • Check state and utility rebates, which are often larger for heat pumps than for other equipment.
  • Replace AC and heat together to pay for one installation.

Tax credit note: the federal 25C and 25D credits ended for equipment installed after December 31, 2025. Many states and utilities still offer heat pump rebates, so check before you buy.

Get local quotes to confirm your estimate

An installer will size the system, check your ducts and electrical panel, and give you a firm price. Use the calculator above to request up to three free quotes, with no obligation. More heating and cooling prices: Heating & Cooling.

Heat pump FAQs

How much does a heat pump cost for a 2,000 sq ft home?

About $8,600 – $14,800 for a standard 4-ton air-source system in a mixed climate, at national average prices. Cold-climate and variable-speed models cost more.

Do heat pumps work in cold climates?

Yes. Cold-climate models can heat homes in New England and the upper Midwest, though very cold areas may still need backup heat on the coldest nights.

How long does a heat pump last?

Air-source heat pumps typically last about 15 years. Geothermal indoor units last longer, and the ground loop much longer.

Is geothermal worth the cost?

It has the lowest running costs, but it costs about twice as much as an air-source system up front. It suits owners staying 15 years or more with room for a ground loop.

Can a heat pump replace my furnace and AC?

Yes. One heat pump heats and cools, so it replaces both. You can also keep a newer furnace as backup.

Are there tax credits for heat pumps in 2026?

Not federal ones; the federal credits ended for systems installed after December 31, 2025. Check your state and utility for rebates.

How we estimate these costs

ImprovementCalc prices an air-source heat pump as a fixed amount plus an amount per ton for a ducted system (outdoor unit and air handler), multiplied by an efficiency factor. Geothermal uses separate rates that include the ground loop. Size comes from living area and a climate rule of thumb, rounded up to the next half ton. Duct work and a $50–$300 permit are separate. Regional factors reflect labor rates and demand. Totals are rounded to the nearest $100.

Sources:

Prices last checked November 2026.