Topping up a 1,000 sq ft attic from about R-11 to R-49 with blown-in fiberglass typically costs $1,300 – $2,500. Insulating existing walls runs about $1 to $2 per sq ft of wall, and spray foam costs two to four times as much as blown-in. Price your project with the insulation cost calculator.
Insulation costs at a glance
| Project | Typical cost (national) | What drives the price | Calculator |
|---|---|---|---|
| Attic insulation | $1,300 – $2,500 (1,000 sq ft, blown-in, R-11 to R-49) | Area, R-value added, type, removal and air sealing | Insulation calculator |
| Wall insulation (existing walls) | $1,200 – $2,200 (1,200 sq ft, dense-pack cellulose) | Wall area, siding or drywall access, foam vs cellulose | Insulation calculator |
| Crawl space or floor insulation | $700 – $1,400 (800 sq ft, batts) | Access, vapor barrier, type | Insulation calculator |
| Spray foam | $1.50 – $5 per sq ft | Open vs closed cell, thickness | Insulation calculator |
| Soundproofing a room | $1,400 – $4,300 (12 × 12 ft room); $10 – $30 per sq ft | Walls, ceiling, doors, decoupling method | Coming soon |
How much insulation do you need?
Insulation is rated by R-value: the higher the number, the better it slows heat. ENERGY STAR and the US Department of Energy recommend different attic levels by climate. Most existing homes have far less than the recommended amount.
| Climate | Recommended attic level | Roughly |
|---|---|---|
| Warm (South, Gulf Coast, Southwest) | R-30 to R-49 | about 10 to 16 inches of blown-in |
| Mixed (mid-latitude states) | R-38 to R-60 | about 13 to 20 inches |
| Cold (northern states) | R-49 to R-60 | about 16 to 20 inches |
Blown-in, batts or spray foam?
| Type | Installed cost per sq ft per R | Best for |
|---|---|---|
| Blown-in fiberglass | $0.035 – $0.065 | Attic top-ups; fills around obstructions |
| Blown-in cellulose | $0.040 – $0.070 | Attics and dense-packing closed walls; recycled content |
| Fiberglass batts | $0.035 – $0.070 | Open walls, floors, unfinished attics with even joists |
| Open-cell spray foam | $0.120 – $0.180 | Rooflines and walls where air sealing matters; cheaper foam |
| Closed-cell spray foam | $0.150 – $0.230 | Crawl spaces, rim joists, basements; adds a vapor barrier |
Air seal first, and where to start
Air leaks through the attic floor (around lights, pipes, wiring and the attic hatch) waste as much energy as thin insulation, and insulation does not stop air. Seal those gaps first; it usually costs $400 to $1,500 for an attic. Then insulate in this order for the best return: the attic, then rim joists and crawl spaces, then walls.
Soundproofing
Soundproofing uses dense insulation together with extra drywall, resilient channels or clips and sealed gaps to cut noise between rooms or from outside. A single 12 × 12 ft room typically costs $1,400 to $4,300 depending on how many surfaces are treated.
Common insulation mistakes
- Covering soffit vents. Blown-in insulation that blocks the vents traps moisture. Baffles keep the airflow open.
- Insulating over knob-and-tube wiring. Old, live knob-and-tube wiring can overheat when buried. Have an electrician check it first.
- Skipping air sealing. Insulation alone will not stop drafts.
- Burying recessed lights that are not rated for insulation contact (IC-rated).
Hiring an insulation contractor
Ask for the R-value and depth to be installed, the material and how many bags it takes (bag labels list coverage), air sealing details, baffles for soffit vents, and a dam around the attic hatch. Many utilities offer rebates and free energy audits; the federal 25C credit for insulation ended for work done after 2025.
Safety: old vermiculite insulation may contain asbestos, and spray foam releases fumes while it cures. Have suspect insulation tested before it is disturbed and stay out of the home during spray foam work.
Related costs: Heating & Cooling, Windows, Solar and Roofing.
Get local insulation quotes
Price your project first, then compare quotes. Use the insulation cost calculator to get an estimate and request up to three free quotes, with no obligation.
Insulation FAQs
About $1,300 – $2,500 to top up a 1,000 sq ft attic from R-11 to R-49 with blown-in fiberglass, at national average prices.
Blown-in fills gaps around obstructions and is usually best for attic top-ups. Batts suit open walls and floors with regular framing.
It air seals and insulates in one step, which helps in crawl spaces, rim joists and rooflines, but it costs two to four times as much as blown-in.
Yes. Installers drill small holes and blow in dense-pack cellulose or fiberglass, or inject foam, then patch the holes.
No federal one: the 25C credit ended for work done after December 31, 2025. Check your utility and state for rebates.
How we estimate these costs
Our insulation ranges come straight from the ImprovementCalc calculator, which prices each insulation type per sq ft per R-value added and is checked against national cost guides updated in 2026. The soundproofing range is a national figure from a published cost guide.
Sources:
- HomeGuide: Insulation Cost (2026)
- Angi: Attic Insulation Cost (2026)
- HomeGuide: Spray Foam Insulation Cost (2026)
- ENERGY STAR: Recommended Home Insulation R-Values
- US DOE: Insulation
- HomeGuide: Cost to Soundproof a Room (2026)
Prices last checked November 2026.
Our full method: How ImprovementCalc estimates costs Where our prices come from How we test every calculator