A 12 × 16 ft pressure-treated deck typically costs $5,400 – $11,400 with a railing on two sides, and a 10 × 20 ft concrete paver patio $1,600 – $3,000. Composite decking and natural stone cost more. Price yours with the deck cost calculator or the paver patio calculator.
Outdoor living costs at a glance
| Project | Typical cost (national) | What drives the price | Calculator |
|---|---|---|---|
| Deck | $5,400 – $11,400 (12 × 16 ft, pressure-treated); $25 – $80 per sq ft | Size, decking material, height, railing, stairs | Deck cost calculator |
| Paver patio | $1,600 – $3,000 (200 sq ft, concrete pavers); $8 – $25 per sq ft | Area, paver type, base, sealing | Paver patio calculator |
| Inground pool | Varies by type and size | Gunite, fiberglass or vinyl; size; decking | Coming soon |
| Pergola | Varies by size and material | Wood, vinyl or aluminum; size | Coming soon |
| Shed | Varies by size and build | Kit or custom, size, foundation | Coming soon |
Also in this section: awnings and patio covers and hot tub installation.
Wood or composite decking
| Decking | Installed per sq ft | Upkeep | Lifespan |
|---|---|---|---|
| Pressure-treated wood | $25 – $50 | Stain or seal every 2 to 3 years | 10 to 20 years |
| Cedar or redwood | $30 – $50 | Stain or seal every 2 to 3 years | 15 to 25 years |
| Composite or PVC | $40 – $80 | Wash once or twice a year | 25 to 30 years or more |
Composite costs more up front but needs no staining, so the gap narrows over 15 to 20 years. Pressure-treated wood is the cheapest way to get a deck built today.
Pavers, concrete or flagstone
Plain poured concrete is the cheapest patio at about $6 to $10 per sq ft. Concrete pavers cost $8 to $15 and can be lifted and relaid if the ground settles. Brick and natural stone cost more but last for decades. See the concrete patio calculator to compare.
Pools: gunite, fiberglass or vinyl
Vinyl-liner pools cost the least to build, fiberglass shells install fastest and need the least upkeep, and gunite (concrete) pools can take any shape but cost the most and need resurfacing every 10 to 15 years. Budget for fencing, decking, electrical work and yearly running costs as well as the pool itself.
Permits and setbacks
Most towns require a permit for decks attached to the house or more than about 30 in off the ground, for pools and their fences, and for sheds above a set size. Setback rules control how close you can build to property lines.
Common outdoor mistakes
- Ignoring footings and ledger flashing on decks. Rot at the ledger is the leading cause of deck collapses.
- Forgetting pool fencing and running costs.
- Building a shed over the permit size limit without a permit.
- Skipping a compacted base under pavers, which leads to sinking and weeds.
Safety: call 811 before digging footings or a patio base, and have older decks checked for loose railings and rotted ledger boards.
Related costs: Fencing, Concrete & Driveways, Landscaping & Trees and Painting.
Get local deck and patio quotes
Price your project first, then compare quotes. Use the deck cost calculator or the paver patio calculator to get an estimate and request up to three free quotes, with no obligation.
Outdoor living FAQs
About $5,400 – $11,400 for a 12 × 16 ft pressure-treated deck with some railing, or $25 to $50 per sq ft.
About $1,600 – $3,000 for a 10 × 20 ft concrete paver patio, or $8 to $15 per sq ft.
A ground-level paver or concrete patio usually costs less per square foot than a deck, and needs less upkeep.
Usually, if it is attached to the house or more than about 30 in off the ground. Check with your town.
It costs more up front but needs no staining and lasts longer, so it often evens out over 15 to 20 years.
How we estimate these costs
Deck and patio ranges come straight from the ImprovementCalc calculators, which are checked against national cost guides updated in 2026.
Sources:
Prices last checked November 2026.
Our full method: How ImprovementCalc estimates costs Where our prices come from How we test every calculator