A 400 sq ft ground-floor bedroom suite with a bathroom typically costs $59,200 – $122,000, including plans and permits. Most additions cost $125 to $250 per sq ft on the ground floor and $200 to $450 per sq ft for a second story.
Use the home addition cost calculator below to price your addition by size, type, use and finish. The tables and examples on this page use the same formula.
Home Addition Cost Calculator
Estimated home addition cost
$59,200 – $122,000
Typical: $90,600
Using national average prices. Add your zip code for local prices.
- Construction$57,500 – $115,000
- Plans, engineering and permits$1,700 – $7,000
- Typical cost per sq ft$227
- Check zoning setbacks and lot coverage limits before paying for plans. Many lots limit how far you can build toward the property line.
- Adding bedrooms can require a larger septic system or more heating and cooling capacity.
Sorry, we couldn't calculate that. Please check your answers, or reload the page.
Compare quotes from local addition contractors
Free, with no obligation. Local, pre-screened pros will contact you to confirm your project and give you a price.
Thanks! Your request is in. Local pros will contact you shortly, usually within a business day, to talk about your project.
Check your quote
We compare it with the estimate for your answers above and your zip code.
Estimates are a guide. Prices vary with your home and local conditions.
Got more than one quote? Compare them side by side →
Questions to ask
Red flags
Share your price
Tell us what you were quoted or paid. We use it, anonymously, to check and improve our estimates. It uses your answers above, so change them there if you need to.
Thank you. Your price helps other homeowners.
Estimates are a guide. Prices vary with your home and local conditions.
What drives the cost of a home addition
An addition is a small house: foundation, framing, roof, windows, siding, insulation, plumbing, wiring, heating and finishes, all tied into the existing home. The calculator multiplies the size by a price per sq ft for the type of addition, then adjusts for what the room is used for and the finish level, and adds plans, engineering and permits.
Type of addition
| Type | Per sq ft | Example | Typical cost |
|---|---|---|---|
| Bump-out | $100 – $225 | 80 sq ft | $9,700 – $25,000 |
| Ground-floor room | $125 – $250 | 400 sq ft | $51,700 – $107,000 |
| Second story | $200 – $450 | 400 sq ft | $81,700 – $187,000 |
Bump-outs extend one room by a few feet and are usually under 100 sq ft. Second stories cost the most per square foot because the roof comes off, the structure below may need reinforcing, and a staircase takes up space on the floor below.
Room use and finish
| Choice | Effect on construction cost |
|---|---|
| Bedroom, family room or office | Base price |
| Bedroom suite with a bathroom | +15% |
| Kitchen or kitchen extension | +30% |
| High-end finishes | +30% |
| Shell only (no interior) | About half |
Size
| Addition size | Ground floor, bedroom suite | Second story, bedroom suite |
|---|---|---|
| 200 sq ft | $30,400 – $64,500 | $47,700 – $110,500 |
| 300 sq ft | $44,800 – $93,300 | $70,700 – $162,300 |
| 400 sq ft | $59,200 – $122,000 | $93,700 – $214,000 |
| 600 sq ft | $88,000 – $179,500 | $139,700 – $317,500 |
| 800 sq ft | $116,700 – $237,000 | $185,700 – $421,000 |
Home addition cost by region
| Region | Price factor | 400 sq ft ground-floor suite | Typical |
|---|---|---|---|
| Southeast (GA, SC, NC, AL, MS, TN, KY, VA, WV) | 0.88 | $52,100 – $107,400 | $79,700 |
| South Central (TX, OK, LA, AR) | 0.90 | $53,300 – $109,800 | $81,500 |
| Midwest and Mountain West | 1.00 | $59,200 – $122,000 | $90,600 |
| Mid-Atlantic (NY, NJ, PA, MD, DE, DC) | 1.15 | $68,100 – $140,300 | $104,200 |
| New England | 1.20 | $71,000 – $146,400 | $108,700 |
| Florida | 1.20 | $71,000 – $146,400 | $108,700 |
| Pacific (CA, WA, OR, AK, HI) | 1.25 | $74,000 – $152,500 | $113,200 |
Worked examples: three real-world additions
These are example homes, not real customers. Each uses national average prices (price factor 1.0).
Example 1: ground-floor bedroom suite
400 sq ft (20 × 20 ft) bedroom with a bathroom, standard finish.
- Construction: 400 × $125 × 1.15 = $57,500 low; 400 × $250 × 1.15 = $115,000 high
- Plans and permits: $1,700 low; $7,000 high
- Total: $59,200 low; $122,000 high
Estimated cost: $59,200 – $122,000 (typical $90,600)
Example 2: kitchen bump-out
80 sq ft (8 × 10 ft) bump-out to enlarge a kitchen, standard finish.
- Construction: 80 × $100 × 1.3 = $10,400 low; 80 × $225 × 1.3 = $23,400 high
- Plans and permits: $1,700 low; $7,000 high
- Total: $12,100 low; $30,400 high
Estimated cost: $12,100 – $30,400 (typical $21,300)
Example 3: second story with two bedrooms
600 sq ft second story over a ranch, two bedrooms and a hall, high-end finish.
- Construction: 600 × $200 × 1.3 = $156,000 low; 600 × $450 × 1.3 = $351,000 high
- Plans and permits: $1,700 low; $7,000 high
- Total: $157,700 low; $358,000 high
Estimated cost: $157,700 – $358,000 (typical $257,900)
Hidden costs to budget for
- Soil tests and site work, including removing trees or regrading.
- Upgrading the electrical panel or heating and cooling system.
- A larger septic system when you add bedrooms.
- Matching roofing and siding on the existing house.
- Utility line moves for gas, water or sewer.
- Temporary housing during a second-story build.
DIY vs hiring a pro
An addition needs drawings, a permit, inspections and structural work, so almost everyone hires a general contractor or a design-build firm. Owners can save by doing painting, flooring or trim at the end, but the shell, roof, plumbing and electrical should be done by licensed trades.
Safety: never remove a wall or add a story without an engineer confirming the load path. Call 811 before any digging for a foundation.
How to read a home addition quote
- Plans, engineering and who pulls permits
- Foundation type and site work
- Framing, roof, windows and siding tie-in
- Plumbing, electrical and heating and cooling
- Interior finishes or allowances with dollar amounts
- Schedule, payment draws tied to milestones, and warranty
Red flags:
- A price per sq ft with no written scope
- Allowances far below what you plan to buy
- Large deposits before work starts
- No license, insurance or permits
- No plan for tying into the existing roof
Ways to save on a home addition
- Build out on the ground floor instead of up, if the lot allows.
- Keep a simple rectangle with a simple roof line.
- Put bathrooms and kitchens next to existing plumbing.
- Consider finishing a basement or attic first, which is often cheaper per square foot.
- Use stock windows and doors.
Tip: check zoning setbacks and lot coverage before paying for full plans. A quick call to the planning office can save a redesign.
Get local quotes to confirm your estimate
A contractor will check your lot, foundation and roof before giving a firm price. Use the calculator above to request up to three free quotes, with no obligation. More remodeling prices: Remodeling.
Home addition FAQs
About $125 to $250 per sq ft for a ground-floor room and $200 to $450 for a second story, before plans and permits.
About $51,700 – $107,000 for a 400 sq ft bedroom or family room, or $59,200 – $122,000 with a bathroom.
Building out on the ground floor is usually cheaper per square foot, but a second story saves yard space and may be the only option on a small lot.
Usually 3 to 6 months of construction, plus 1 to 3 months for design and permits.
You need drawings for the permit; a designer or design-build firm can do them, and an engineer for structural work.
How we estimate these costs
ImprovementCalc prices additions by area at $100 to $225 per sq ft (bump-out), $125 to $250 (ground-floor room) or $200 to $450 (second story). A bedroom suite with a bathroom adds 15%, a kitchen 30% and high-end finishes 30%; a shell-only job prices half. Plans, engineering and permits add $1,700 to $7,000. Totals are rounded to the nearest $100.
Sources:
Prices last checked November 2026.
Our full method: How ImprovementCalc estimates costs Where our prices come from How we test every calculator