A 10 × 20 ft concrete paver patio typically costs $1,600 – $3,000, about $8 to $15 per sq ft installed. Brick and natural stone cost more, and a 600 sq ft paver driveway runs about $6,000 – $11,300.
Use the paver patio cost calculator below to price your patio, walkway or driveway by size and paver type. The tables and examples on this page use the same formula.
Paver Patio Cost Calculator
Estimated paver cost
$1,600 – $3,000
Typical: $2,300
Using national average prices. Add your zip code for local prices.
- Pavers, base and installation$1,600 – $3,000
- Edge restraints keep pavers from spreading. Ask how the edges will be held in place.
Sorry, we couldn't calculate that. Please check your answers, or reload the page.
Compare quotes from local paver installers
Free, with no obligation. Local, pre-screened pros will contact you to confirm your project and give you a price.
Thanks! Your request is in. Local pros will contact you shortly, usually within a business day, to talk about your project.
Check your quote
We compare it with the estimate for your answers above and your zip code.
Estimates are a guide. Prices vary with your home and local conditions.
Got more than one quote? Compare them side by side →
Questions to ask
Red flags
Share your price
Tell us what you were quoted or paid. We use it, anonymously, to check and improve our estimates. It uses your answers above, so change them there if you need to.
Thank you. Your price helps other homeowners.
Estimates are a guide. Prices vary with your home and local conditions.
What drives the cost of a paver patio
Installers price pavers by the square foot. The rate covers digging out the area, a compacted gravel base, a sand bed, the pavers, edge restraints and joint sand. The paver type sets the rate, driveways need a deeper base, and removing old concrete and sealing the finished surface are extra.
Size and paver type
| Patio | Concrete pavers | Brick | Natural stone |
|---|---|---|---|
| 10 × 10 ft (100 sq ft) | $1,000 – $1,800 | $1,000 – $1,800 | $1,200 – $2,500 |
| 12 × 12 ft (144 sq ft) | $1,200 – $2,200 | $1,400 – $2,400 | $1,700 – $3,600 |
| 10 × 20 ft (200 sq ft) | $1,600 – $3,000 | $2,000 – $3,400 | $2,400 – $5,000 |
| 16 × 20 ft (320 sq ft) | $2,600 – $4,800 | $3,200 – $5,400 | $3,800 – $8,000 |
| 20 × 20 ft (400 sq ft) | $3,200 – $6,000 | $4,000 – $6,800 | $4,800 – $10,000 |
| Item | Cost |
|---|---|
| Concrete pavers | $8 – $15 per sq ft |
| Clay brick | $10 – $17 per sq ft |
| Natural stone or flagstone | $12 – $25 per sq ft |
| Driveway (deeper base) | +25% |
| Remove old concrete or surface | $1 – $3 per sq ft |
| Cleaning and sealing | $1.50 – $3.25 per sq ft |
Paver patio cost by region
| Region | Price factor | 200 sq ft, concrete pavers | Typical |
|---|---|---|---|
| Southeast (GA, SC, NC, AL, MS, TN, KY, VA, WV) | 0.88 | $1,400 – $2,600 | $2,000 |
| South Central (TX, OK, LA, AR) | 0.90 | $1,400 – $2,700 | $2,100 |
| Midwest and Mountain West | 1.00 | $1,600 – $3,000 | $2,300 |
| Mid-Atlantic (NY, NJ, PA, MD, DE, DC) | 1.15 | $1,800 – $3,400 | $2,600 |
| New England | 1.20 | $1,900 – $3,600 | $2,800 |
| Florida | 1.20 | $1,900 – $3,600 | $2,800 |
| Pacific (CA, WA, OR, AK, HI) | 1.25 | $2,000 – $3,800 | $2,900 |
Worked examples: three real-world projects
These are example homes, not real customers. Each uses national average prices (price factor 1.0).
Example 1: 10 × 20 ft concrete paver patio
200 sq ft patio in a grassy backyard, concrete pavers, no sealing.
- Pavers: 200 × $8 = $1,600 low; 200 × $15 = $3,000 high
- No removal or sealing
Estimated cost: $1,600 – $3,000 (typical $2,300)
Example 2: flagstone patio replacing concrete
400 sq ft natural stone patio where an old concrete slab is broken out, sealed when finished.
- Stone: 400 × $12 = $4,800 low; 400 × $25 = $10,000 high
- Removal: 400 × $1 = $400 low; 400 × $3 = $1,200 high
- Sealing: 400 × $1.50 = $600 low; 400 × $3.25 = $1,300 high
- Total: $5,800 low; $12,500 high
Estimated cost: $5,800 – $12,500 (typical $9,200)
Example 3: paver driveway
600 sq ft (20 × 30 ft) driveway in concrete pavers with a deeper base.
- Pavers: 600 × $8 × 1.25 = $6,000 low; 600 × $15 × 1.25 = $11,250 high
- Round to the nearest $100
Estimated cost: $6,000 – $11,300 (typical $8,600)
Hidden costs to budget for
- Extra excavation on soft or sloped ground.
- Retaining or seat walls, priced separately.
- Steps and borders in a contrasting paver.
- Drainage so water runs away from the house.
- Polymeric joint sand to resist weeds and ants.
- Equipment access through a narrow side yard.
DIY vs hiring a pro
A small paver patio or walkway is a common DIY project: renting a plate compactor and a wet saw costs far less than labor. The work is heavy, though, and a poorly compacted base leads to sinking and uneven pavers within a few years. Driveways and large patios are usually worth hiring out.
Safety: wear a respirator and eye protection when cutting pavers, as the dust contains silica. Call 811 before excavating.
How to read a paver quote
- Area, paver brand, style and color
- Excavation depth and gravel base depth
- Edge restraint type
- Joint sand: regular or polymeric
- Removal of old surfaces and haul-away
- Sealing and warranty
Red flags:
- Base depth not stated
- No edge restraints
- Pavers laid on sand only, with no gravel base
- Large cash deposits
- No license or insurance
Ways to save on pavers
- Choose standard concrete pavers in a simple pattern.
- Keep a simple shape to cut fewer pavers.
- Use a contrasting border instead of a premium paver everywhere.
- Skip sealing on concrete pavers unless you want a wet look.
- Book outside the spring rush.
Tip: buy an extra box of pavers from the same batch and store it. Color matches are hard to find later.
Get local quotes to confirm your estimate
An installer will check soil, slope and access before giving a firm price. Use the calculator above to request up to three free quotes, with no obligation. More outdoor prices: Decks & Outdoor Living.
Paver patio FAQs
About $1,600 – $3,000 for a 10 × 20 ft concrete paver patio, or $8 to $15 per sq ft.
About $6,000 – $11,300 for 600 sq ft of concrete pavers, with a deeper base.
No. Plain concrete costs about $6 to $10 per sq ft; pavers cost $8 to $25 but are easier to repair.
About 25 to 50 years with a good base, edge restraints and occasional resanding.
Sealing is optional. It deepens color and resists stains, and costs about $1.50 to $3.25 per sq ft.
How we estimate these costs
ImprovementCalc multiplies the area by $8 to $15 per sq ft for concrete pavers, $10 to $17 for brick or $12 to $25 for natural stone, and by 1.25 for driveways. Removing an old surface adds $1 to $3 per sq ft and sealing $1.50 to $3.25. New jobs carry a $1,000 to $1,800 minimum. Totals are rounded to the nearest $100.
Sources:
Prices last checked November 2026.
Our full method: How ImprovementCalc estimates costs Where our prices come from How we test every calculator