Skip to content
ImprovementCalcIndependent cost estimates for US homeowners

Siding & Exterior

Siding & Exterior cost calculators

  • Siding Cost Calculator

    Price new siding by wall area, material and trim

    Typical cost: $8,200 – $17,400 · vinyl, 2,000 sq ft home

  • Stucco Cost Per Square Foot Calculator

    Price new stucco, EIFS, recoats and repairs by wall area

    Typical cost: $7 – $14 per sq ft · installed, traditional or EIFS

Re-siding a typical 2,000 sq ft one-story home costs about $8,200 to $17,400 in vinyl, and $11,400 to $28,600 in fiber cement or wood. Smaller exterior jobs, like pressure washing or new soffits, run from a few hundred to a few thousand dollars. Start with our siding cost calculator to price your own walls by size, material and zip code.

Siding and exterior costs at a glance

ProjectTypical cost (national)What drives the priceCalculator
Siding replacement$8,200 – $17,400 (vinyl, 2,000 sq ft home); $11,400 – $28,600 (fiber cement, wood)Wall area, material, removal of old siding, trim, storiesSiding cost calculator
Stucco$7 – $17 per sq ft installedTraditional vs synthetic (EIFS), wall area, repairs to the baseStucco cost calculator
Mobile home skirting$1,000 – $3,000 single-wide; $1,400 – $4,500 double-wideMaterial (vinyl, faux stone, insulated), home length, vents and doorsComing soon
Pressure washing$300 – $800 for a typical houseWall area, siding type, stories, how dirty it isComing soon
Soffit and fascia replacement$6 – $30 per linear ft (soffit); $7 – $22 per linear ft (fascia)Material, length of eaves, rot repair, heightComing soon
Installed prices including labor and materials, national averages. Siding ranges include removal of old siding, house wrap and a permit.

Which exterior project do you need?

Full replacement or repair?

Siding can often be patched. A few cracked vinyl panels, a dented section or a rotted board can be replaced for a few hundred to a couple of thousand dollars. The catch is matching: faded vinyl and discontinued profiles are hard to match, so a repair can stand out. Replace the whole house when damage is widespread, the siding is near the end of its life, or you want a different look.

Repair usually makes sense if…Replace if…
Damage is limited to one wall or a few boardsCracks, warping or rot show on several walls
You can find a matching profile and colorThe siding is faded, brittle or discontinued
The sheathing underneath is dry and solidYou see moisture damage, mold or soft sheathing
The siding is less than about 15 to 20 years oldVinyl or wood is 20 to 40 years old

Remove the old siding or install over it?

Some contractors offer to install new siding over the old layer to save on tear-off. It avoids a removal charge, often $1,000 to $2,500 for a whole house, but it hides rot, traps moisture and can make window and door trim look recessed. Most manufacturers and building inspectors prefer a full tear-off so the sheathing can be checked and a new weather barrier installed.

House wrap and insulated siding

House wrap is the weather-resistant layer between the sheathing and the siding. Replacing it during a re-side usually adds about $0.50 to $1 per sq ft and protects the wall from water that gets behind the siding. Insulated vinyl siding has foam bonded to the back. It adds a little insulation and stiffness, but walls lose more heat through gaps and windows than through siding, so air sealing and attic insulation usually pay back faster.

Choosing a siding material

Material drives most of the price and decides how much upkeep you will do. Climate matters too: fiber cement and stucco resist fire and insects, vinyl can crack in hard freezes and sag near grills, and wood needs regular paint or stain in wet climates.

MaterialInstalled per sq ftTypical lifespanMaintenance
Vinyl$4 – $820 – 40 yearsVery low; wash yearly
Engineered wood$5 – $10Varies by brand; often 30+ year warrantiesRepaint every 10 to 15 years
Aluminum or steel$5 – $1120 – 40 yearsLow; aluminum dents, steel can rust if scratched
Fiber cement$6 – $1350+ yearsRepaint every 10 to 15 years
Stucco$7 – $1450 – 80 yearsLow; patch cracks
Wood (cedar)$7 – $1520 – 40 yearsHigh; stain or paint every few years
Siding material and installation only. Removal, house wrap, trim and permits are extra.

Vinyl is the budget choice and the most common. Fiber cement costs more but lasts far longer and stands up to fire, hail and woodpeckers. Engineered wood gives a wood look for less than cedar. Real wood looks best but needs the most care.

Common siding mistakes

  • Not checking for rot under old siding. Ask for a per-sheet price to replace damaged sheathing before work starts, and budget 10% to 15% extra on older homes.
  • Leaving trim and soffit work off the quote. New siding next to worn trim looks unfinished. Make sure every quote prices the same trim, soffit and fascia work.
  • Ignoring HOA rules. Many homeowner associations control siding color and material. Get written approval before you sign a contract.

Hiring a siding contractor

Licensing rules vary by state, and some states only require local registration. Always ask for proof of liability insurance and workers’ compensation. For homes built before 1978, old painted siding may contain lead, so the contractor must be EPA lead-safe certified. Many fiber cement and engineered wood makers also certify installers, and their best warranties need one.

Most towns require a permit for a full re-side. Permit and inspection fees usually run $150 to $1,000, and some cities charge more. Get at least three written quotes. A good quote lists the wall area, the exact product and color, removal and disposal, house wrap, trim, soffit and fascia, flashing around windows and doors, the permit, and both warranties.

Safety: siding a second story means ladders, scaffolding and work at height. Leave upper walls to an insured crew.

Prices vary by region with labor rates, codes and demand. Pacific and New England homeowners often pay 20% to 25% more than the national average, while much of the South pays less. Each ImprovementCalc calculator adjusts its estimate for your zip code.

Get local siding quotes

Price your project first, then compare quotes. Use the siding cost calculator to get an estimate and request up to three free quotes from local contractors, with no obligation.

Siding FAQs

How long does siding last?

Vinyl and metal siding usually last 20 to 40 years, wood 20 to 40 years with regular care, fiber cement 50 years or more, and stucco 50 to 80 years. Climate, installation quality and upkeep make a big difference.

What is the cheapest siding?

Vinyl is usually the cheapest to install, at about $4 to $8 per sq ft. Engineered wood and metal come next. Fiber cement, stucco and cedar cost the most.

Can I replace siding on one side of the house?

Yes, if you can match the profile and color. Older vinyl fades, so a new section may look different. Some homeowners put the new siding on the front and move matching old panels to less visible walls.

Does new siding add value to a home?

It often does. Fiber cement and vinyl siding replacement are regularly among the better-returning exterior projects in national cost-versus-value reports, and new siding helps a home sell faster.

How much does it cost to pressure wash a house?

Most houses cost about $300 to $800 to pressure wash, or roughly $0.30 to $0.45 per sq ft of siding. Two-story homes and heavy mildew cost more.

How we estimate these costs

Siding replacement ranges come from our siding calculator, which uses installed prices per sq ft of wall by material plus removal, house wrap, trim and a permit, checked against national cost guides updated in 2026. Ranges for stucco, skirting, pressure washing, soffit and fascia are national figures from published cost guides. Your local price depends on labor rates, access and the condition of your walls.

Sources:

Prices last checked November 2026.