A ducted air-source heat pump usually costs $7,100 – $12,300 installed for a standard 3-ton system. Premium cold-climate models and larger homes run $15,000 to $30,000, and geothermal systems cost $15,000 to $35,000 or more.
Use the heat pump cost calculator below to price your system by home size, climate, type, efficiency and ductwork. The tables and examples on this page use the same formula.
Heat Pump Cost Calculator
Estimated heat pump cost
$8,600 – $14,800
Typical: $11,700
Using national average prices. Add your zip code for local prices.
- System size4.0 tons
- Heat pump system, installed$8,500 – $14,500
- Permit$100 – $300
- Size is a rule-of-thumb estimate. Ask for a Manual J load calculation; cold-climate homes may need a larger unit or backup heat.
- Older homes may need an electrical panel upgrade for a heat pump. Ask the installer to check before you sign.
- No ducts at all? A ductless mini-split is usually cheaper than adding ductwork.
Sorry, we couldn't calculate that. Please check your answers, or reload the page.
Compare quotes from local heat pump installers
Free, with no obligation. Local, pre-screened pros will contact you to confirm your project and give you a price.
Thanks! Your request is in. Local pros will contact you shortly, usually within a business day, to talk about your project.
Check your quote
We compare it with the estimate for your answers above and your zip code.
Estimates are a guide. Prices vary with your home and local conditions.
Got more than one quote? Compare them side by side →
Questions to ask
Red flags
Share your price
Tell us what you were quoted or paid. We use it, anonymously, to check and improve our estimates. It uses your answers above, so change them there if you need to.
Thank you. Your price helps other homeowners.
Estimates are a guide. Prices vary with your home and local conditions.
What drives the cost of a heat pump
A heat pump moves heat instead of burning fuel: outdoors in summer and indoors in winter. A ducted system has an outdoor unit and an indoor air handler, so one installation replaces both your AC and your furnace. The calculator prices air-source systems as a fixed amount plus an amount per ton, times an efficiency factor. Geothermal systems have their own rates, which include drilling or digging the ground loop.
Home size and climate
Heat pumps are sized in tons like air conditioners. In cold climates they are sized for heating, so the calculator allows fewer square feet per ton there (450) than in mixed climates (550). It rounds up to the next half ton, from 1.5 to 5 tons.
| Home | Size | Standard air-source, installed | Typical |
|---|---|---|---|
| 1,000 sq ft, mixed | 2 tons | $5,600 – $9,800 | $7,700 |
| 1,500 sq ft, mixed | 3 tons | $7,100 – $12,300 | $9,700 |
| 2,000 sq ft, mixed | 4 tons | $8,600 – $14,800 | $11,700 |
| 2,000 sq ft, cold | 4.5 tons | $9,300 – $16,100 | $12,700 |
| 2,500 sq ft, mixed | 5 tons | $10,100 – $17,300 | $13,700 |
| 3,000 sq ft, mixed | 5 tons | $10,100 – $17,300 | $13,700 |
Type of heat pump
| Type | How it works | 3.5-ton system, installed | Best for |
|---|---|---|---|
| Air-source | Pulls heat from outdoor air | $7,800 – $13,600 | Most homes with ducts |
| Geothermal (ground-source) | Pulls heat from the ground through buried pipe loops | $16,800 – $28,100 | Long-term owners with yard space; lowest running costs |
Ductless mini-splits are another kind of heat pump, for homes without ducts; they are priced separately (about $3,000 to $4,900 for one zone).
Efficiency
| Efficiency | Price factor | 3-ton air-source, installed |
|---|---|---|
| Standard (14.3 to 15 SEER2) | × 1.0 | $7,100 – $12,300 |
| High (16 to 18 SEER2, two-stage) | × 1.35 | $9,500 – $16,500 |
| Premium (19+ SEER2, variable-speed or cold-climate) | × 1.7 | $12,000 – $20,700 |
Every new split heat pump must reach at least 14.3 SEER2 and 7.5 HSPF2 (the heating rating). Variable-speed and cold-climate models keep heating efficiently in freezing weather; the US Department of Energy reports cold-climate heat pumps can cut household energy use by up to 40%.
Existing ductwork
Sound ducts can be reused. Sealing and repairs add $500 to $2,000; full replacement adds $1,400 to $6,000. If you have no ducts at all, mini-splits are usually cheaper than adding ductwork.
What heats your home now
This doesn’t change the price, but it changes the payoff. Homes that heat with oil, propane or electric baseboard usually see the biggest savings when they switch. If you have a newer gas furnace, you can keep it as backup heat for the coldest days (a “dual fuel” system).
Heat pump cost by region
| Region | Price factor | 2,000 sq ft home, 4-ton standard air-source | Typical |
|---|---|---|---|
| Southeast (GA, SC, NC, AL, MS, TN, KY, VA, WV) | 0.88 | $7,500 – $13,100 | $10,300 |
| South Central (TX, OK, LA, AR) | 0.90 | $7,700 – $13,400 | $10,500 |
| Midwest and Mountain West | 1.00 | $8,600 – $14,800 | $11,700 |
| Mid-Atlantic (NY, NJ, PA, MD, DE, DC) | 1.15 | $9,800 – $17,000 | $13,400 |
| New England | 1.20 | $10,300 – $17,700 | $14,000 |
| Florida | 1.20 | $10,300 – $17,700 | $14,000 |
| Pacific (CA, WA, OR, AK, HI) | 1.25 | $10,700 – $18,400 | $14,600 |
Worked examples: three real-world homes
These are example homes, not real customers. Each uses national average prices (price factor 1.0).
Example 1: 1,500 sq ft home, standard air-source
Mixed climate, standard efficiency, ducts in good shape.
- Size: 1,500 ÷ 550 = 2.73 tons, rounded up to 3 tons
- System, low: $2,500 + $1,500 × 3 = $7,000; high: $4,500 + $2,500 × 3 = $12,000
- Add permit: $7,050 low; $12,300 high, rounded
Estimated cost: $7,100 – $12,300 (typical $9,700)
Example 2: 2,200 sq ft home in a cold climate, premium heat pump
Cold climate, premium variable-speed model, ducts need repairs; replacing an oil furnace.
- Size: 2,200 ÷ 450 = 4.89 tons, rounded up to 5 tons
- System, low: ($2,500 + $1,500 × 5) × 1.7 = $17,000; high: ($4,500 + $2,500 × 5) × 1.7 = $28,900
- Duct repairs: $500 low; $2,000 high
- Add permit: $17,550 low; $31,200 high, rounded
Estimated cost: $17,600 – $31,200 (typical $24,400)
Example 3: 2,500 sq ft home, geothermal
Mixed climate, geothermal ground-source system, ducts in good shape.
- Size: 2,500 ÷ 550 = 4.55 tons, rounded up to 5 tons
- System, low: $8,000 + $2,500 × 5 = $20,500; high: $12,000 + $4,500 × 5 = $34,500
- Add permit: $20,550 low; $34,800 high, rounded
Estimated cost: $20,600 – $34,800 (typical $27,700)
Hidden costs to budget for
- Electrical upgrades. Older homes may need a bigger panel or new circuits for the outdoor unit and backup heat strips.
- Backup heat. Cold-climate homes may need electric heat strips or a kept furnace for the coldest nights.
- Ductwork, $500 to $6,000 depending on condition.
- Thermostat. Variable-speed systems often need a matching thermostat.
- Removing the old furnace or oil tank if you are switching fuels.
- Permit, usually $50 to $300.
- Ground loop surprises for geothermal, such as rock or a small lot that needs vertical drilling.
DIY vs hiring a pro
A ducted heat pump is a pro job. Refrigerant handling requires EPA Section 608 certification, the system must be charged and tested, and the high-voltage wiring and permit inspections need a licensed contractor. Geothermal loops need specialist drilling or excavation. Homeowners can keep the outdoor unit clear of snow and leaves and change filters regularly.
Safety: heat pumps run on 240-volt circuits. Don’t open the outdoor unit or electrical panel yourself.
How to read a heat pump quote
- Brand and model numbers for the outdoor unit and air handler (matched)
- Size in tons, SEER2 and HSPF2, and the heating output at low temperatures
- Backup heat: heat strips, kept furnace or none
- Duct inspection, sealing or replacement
- Electrical work and whether a panel upgrade is needed
- Thermostat, permit, removal of old equipment
- For geothermal: loop type, depth or length, and who does the drilling
- Parts and labor warranties
Red flags:
- No mention of how the system will perform on your coldest days
- Sizing without a load calculation
- Promised savings with no explanation of your current fuel costs
- Federal tax credit claims for a 2026 installation
- No license, insurance or refrigerant certification
Repair or replace your heat pump?
| Repair is usually enough if… | Replace if… |
|---|---|
| The heat pump is under about 10 years old | It is 12 to 15 years old or more |
| The fix is a capacitor, thermostat or drain ($75 to $400) | The compressor ($800 to $2,500) has failed |
| It heats and cools well once fixed | It struggles in cold weather or needs frequent repairs |
| It uses a refrigerant that is still widely serviced | Repair parts are hard to find |
Most heat pump repairs cost $150 to $650, with an average of about $400.
Ways to save on a heat pump
- Compare three or more quotes with matched model numbers.
- Seal and insulate first. A tighter home can use a smaller, cheaper system.
- Keep a newer gas furnace as backup instead of paying for heat strips you’ll rarely use.
- Choose premium models only where you need them. Mild climates rarely need cold-climate equipment.
- Check state and utility rebates, which are often larger for heat pumps than for other equipment.
- Replace AC and heat together to pay for one installation.
Tax credit note: the federal 25C and 25D credits ended for equipment installed after December 31, 2025. Many states and utilities still offer heat pump rebates, so check before you buy.
Get local quotes to confirm your estimate
An installer will size the system, check your ducts and electrical panel, and give you a firm price. Use the calculator above to request up to three free quotes, with no obligation. More heating and cooling prices: Heating & Cooling.
Heat pump FAQs
About $8,600 – $14,800 for a standard 4-ton air-source system in a mixed climate, at national average prices. Cold-climate and variable-speed models cost more.
Yes. Cold-climate models can heat homes in New England and the upper Midwest, though very cold areas may still need backup heat on the coldest nights.
Air-source heat pumps typically last about 15 years. Geothermal indoor units last longer, and the ground loop much longer.
It has the lowest running costs, but it costs about twice as much as an air-source system up front. It suits owners staying 15 years or more with room for a ground loop.
Yes. One heat pump heats and cools, so it replaces both. You can also keep a newer furnace as backup.
Not federal ones; the federal credits ended for systems installed after December 31, 2025. Check your state and utility for rebates.
How we estimate these costs
ImprovementCalc prices an air-source heat pump as a fixed amount plus an amount per ton for a ducted system (outdoor unit and air handler), multiplied by an efficiency factor. Geothermal uses separate rates that include the ground loop. Size comes from living area and a climate rule of thumb, rounded up to the next half ton. Duct work and a $50–$300 permit are separate. Regional factors reflect labor rates and demand. Totals are rounded to the nearest $100.
Sources:
- Fixr: Heat Pump Installation Cost (updated January 2026)
- Carrier: How Much Does a Heat Pump Cost? (2026)
- Fixr: Heat Pump Repair Cost
- Trane: 2023 DOE efficiency standards
- US DOE: Cold-climate air-source heat pumps
- Fixr: Furnace Installation Cost (updated January 2026)
Prices last checked November 2026.
Our full method: How ImprovementCalc estimates costs Where our prices come from How we test every calculator